YUEQING SANFENG TRANSMISSION CO., LTD. - SWP Series

SWP Series

    Universal Coupling with Cross Shaft is mainly composed of the cross assembly, various forks, spline pairs and other components and parts. It has big transmission torque, big available included angle, long service life, wide application scope, flexible, steady and efficient operation and other advantages.

    The precious space size within the forks of these two series productsis not fully utilized and there is no obvious advantage in various indexes and the cost performance. For more details about SWP series products, please log into the website of YUEQING SANFENG TRANSMISSION CO., LTD. for consulting.

YUEQING SANFENG TRANSMISSION CO., LTD. - SWP Series

Specification and Performance Table of SWP Series

 

Model P-Tm P-Tp P-Tf A β L1 S S1 LFmin LBmin G0 G100 I0 I100
kN.m     mm Kg Kg.㎡
SWP160 10.4 9 6.2 2.89 ≤12° 85 25 15 620 455 55 3.2 0.11 0.0021
SWP180 13 11.3 7.8 4.16 95 30 20 700 510 77 4.16 0.19 0.0035
SWP200 17.5 15.2 10.5 5.84 110 35 800 580 109 5.24 0.34 0.0056
SWP225 24.5 21.3 14.7 7.64 130 40 25 925 670 158 6.45 0.63 0.0084
SWP250 33 28.7 19.8 10.8 135 30 980 720 205 7.78 1.01 0.0122
SWP285 53 46.1 31.8 15.6 150 50 35 1100 800 295 9.7 1.88 0.0189
SWP315 84 73 50.4 21.6 170 55 1240 900 413 12.15 3.17 0.03
SWP350 109 95 65.4 28.7 185 60 40 1400 990 581 15.87 5.38 0.051
SWP390 140 122 84 38.3 205 1480 1100 794 20.09 9.2 0.081
SWP435 264 230 159 53.5 235 75 45 1720 1240 1150 24.8 16.53 0.124
SWP480 370 322 222 71.9 265 85 55 1920 1390 1550 30 27.26 0.182
SWP550 561 488 337 103.6 290 95 60 2100 1530 2150 35.7 50.44 0.257

 

Notes: 1. While the performance parameter errors of previous couplings are uniformly corrected, the design is further optimized to improve the performance indicators of the coupling; 
           2. P-Tm、P-Tp、P-Tf —Respectively allowable torque, pulsating fatigue torque and symmetrical fatigue torque; 
           3. A—Volume Value of the bearing; 
           4. LFmin and Lmin—Respectively the shortest length of the pressure matching fork structure and axle connection fork structure; 
           5. G0—Dead weight at the shortest length of LFmin; 
           6. I0—Transmission inertia at the shortest length of LFmin;
           7. G100 and I00—G & I increments when the length increases 100mm;
           8.YUEQING SANFENG TRANSMISSION CO., LTD. also can design and manufacture as required non-standard products.

 

Return